RECIPROCATING SAW

Technical specification 1.Rated power:- Not less than 900 watt at 220 -240 volts 2. Stroke rate (at no load): Not less than 2700/min. 3. Stroke length : Not less than 28 mm 4. Cutting depth(wood)- Above 165 mm 5. Cutting depth(steel sheet) – More than 20 mm 6. With required accessories and electrical cord of minimum 5 mtr length with 5 amp three/two pinplug along with an extension cord of 10 Mtr. 7. Rate current- Not more than 6 amp 8. Noise level < 100 db 9. Spare blades for metal & wood cutting 10 Nos with suitable protective carry case. 10. Weight- Not more than 5 Kg with blade. 11. The starting current drawn by the motor should be limited to prevent the electric supply fuseblowing. This also prevents the tool starting with a jolt. 12. Air cooled. 13. Rust proof. 14. Internationally certified on standards. Saw must be capable of cutting a variety of materials like- all kind of wood and metal. Firm shouldgive live demonstration in above regard on the samples provided by NDRF. RECIPROCATING SAW BLADE WOOD CUTTING 1.Blade type- Metal ( high carbon steel) blade used for wood cutting 2. Blade length- 230 mm (minimum) 3. Compatibility- Compatible with reciprocating saw equipment 4. TPI ;- Not less than 05 tooth per 2.54 CMS 5. Blade width :- Not less than 19 mm 6. Thickness : - Not less than 1.20 mm 7. Material – Low alloy cold rolled steel strips in hardened, tempered and polished condition havingcarbon, silicon, manganese, chromium, nickel, sulphur and phosphorous 8. Rust proof. 9. Marking – The saw blades shall be marked with the size and manufacturer`s name and trademark at equal spaced intervals over the bands. 11.Internationally certified on quality standards. RECIPROCATING SAW BLADE METAL CUTTING 1. Blade type – Metal blade of bi-metal blades have a teeth of high speed steel and body materialout of high carbon steel used for metal cutting 2. Blade length- Not less than 150 mm. 3. Compatibility- Compatible with reciprocating saw equipment 4. TPI- Not less than 09 tooth per 2.54 cms 5. Blade width- Not less than 16 mm 6. Thickness- Not more than 1.6 mm 7. Material – The low alloy cold rolled steel strips in hardened, tempered and polished conditionhaving carbon, silicon, manganese, chromium, nickel, sulphur and phosphorus 8. Tooth setting – the provision of the rake setting of the tooth shall be at the discretion of the manufacturer. 9. Rust proof. 10. Marking – The saw blades shall be marked with the size and manufacturers name and trademark at equal spaced intervals over the bands. 11. Internationally certified on quality standards