SPECIFICATIONS OF EQUIPMENT/CLOTHING FOR FOREST FIRE

 1. Helmet with face Shield 2. Safety Glasses/Goggles Addl. Remarks/ Compliance required Photos Comm EN 443:2008, EN14458:2004, PERSONAL PROTECTIVE EQUIPMENT BASIC PARAMETERSImpact absorbent - Should be made of polyurethane. Interior-4) Net should be made of Nomex (easy to remove and instal) ii) sweatband should be made of polyurethane foam and covered with genuine leather. Size-Size should be adjustable from 54 to 62 cm (optionally 51 to 65 cm) Visor and goggles-visor should be metalized and transparent, removable, resisting scratch, vapours and chemical effects, made of polycarbonate. Neck Protector - should be easy to remove and install and of following materials i) Made of non-inflammable fabric (short), and Made of noninflammable fabric (long) or, ii)Made of aluminized fabric. Reflecting stripes - should consist of reflecting stripes on all sides. Accessories - i)The Helmet should be equipped with holders for mask attachment, torch, and Communication system ii) Weight should not be more than 1500 gm1. Impact -resistant Poly carbonate lenses 2. UV Protection. 3. Protection against- smoke and fire dust Particles. 4. Wrap around design (for maximum coverage and protection for the eyes). 5. Anti-fog coating and scratch resistance. 6. Adjustable straps. This European Standard is to provide essential performance requirements for protective helmets for Fire fighters EN 171:2002 This European Standard specifies the scale numbers and transmittance requirements for filters 7. Withstand extreme temperature up to 150 degrees Celsius. 8. Weight - Not more than 150 Gm. for protection agaimst infrared radiation Addl. Remarks Photos Comment: 9. Angle of view- 180°-240° 10. Warranty-at least 2 Years Srl No NOMENCLATU RE OF EQUIPMENT SPECIFICATION OF ITEMS 3. Fire Mask/Respirator (to obtain latest from DRDO) The comfo respirator was for plastic suit and may not be suitable for the forest fire, hence these specifications have 1. protection against heat radiation and particles. 2. The Mask should offer complete facial protection against heat radiation and incandescent particles, burns and EN 403 reducing possible inhalation of contaminants. 3. The design should include high-visibility reflective strips on both sides and a fixing system so it can be put on without having to take the helmet off. It should feature a double Velcro system for use and rest and can be comfortably worn hanging from the neck when not being used. been indicated. 4. Thread composition 100% meta-aramid thread. 5. Composition of silver reflective fabric 100% F.R. cotton. 6. Weight not more than 120 g. Srl no NOMENCLATU RE OF EQUIPMENT SPECIFICATION OF ITEMS 4. Fire proximity/ resistant suit (Jacket, trousers/, boots, gloves) JACKET/ TROUSERS • Material - fire resistant material. Example:- such as NOMEX or KEVLAR etc. 1. Moisture barrier to protect against steam & boiling water. 2.A breathable lining to keep the wearer cool and comfortable 3. Adequate ventilation to prevent overheating 4. Reflecti've tape on jacket (Front, arm and back) 5.High neck 4 inch collar with overlap and fire resistant Velcro. 6. Central closer with a fire -resistant open end zipper (zipper should be concealed by a flap of the outer shell) 7. Adjustable wrist and outer fire resistant Velcro. 8. Temperature bearing capacity- at least 1000° Celsius for 10 secs. 9.Washable (heat and flame resistant quality should not diminish with washing) 10. Should have reinforced areas such as Elbow and shoulders to provide extra protection from wear and tear 11. Lightweight 12. Warranty- at least 1 year Standards-Composition of the lining 100% fireretardant cotton. Sizes XS, S, M, L, XL, XXL. Gloves: Gloves when tested as per EN 659 should pass minimum standard as: Burning behavior &convective heat. BOOT'S 1. Should be made of durable materials such as leather or Addl. Remarks The suit must meet the NF PА (National fire protection association) 1971; 2007 or EN Gloves-EN 659 or NFPA. European Standard which defines minimum performance requirements and test methods for firefighters' protective gloves EN 15090-2012 Photos CommePage 3 5. Hydration pack (5 Ltr) synthetic leather, with reinforced toe and heel areas. 2. A sturdly, heat and abrasion resistant sole. 3. Soles of the boots should have a deep thread and be slip-resisiant to provide good traction on uneven and slippery terrain. 4. Shculd be waterproof and insulated to protect the feet from extreme heat and cold. 5. Should have high ankle support. 6. Lightweight. 7.Warrarly- at least 1 year The Mokile Back strap Hydration System should comfortably transport water while deployed. 1. Corstructed with a durable derier polyester (Multicam 1000 Denier Nylon) and polyurethane bladder with neoprene covered hose, ii) Hydration pack to hold min. 5 Ltrs of water. iii) The neoprene covered plastic hose with soft bite valve to feature on/off switch which prevents dripping when not in use. iv) Durable, lightweight To be purchased after assessing the market and the quality So, specification is not required No chang BASIC HAND TOOLS 6 Multi-functional tool 1.Muli use tool with lockable fanctions 2.Corr pact size and durable leather pouch 3.Material- Stainless steel 4.Weight. Not more than 350 gm 5.Guatantee- life time Function (Pliers, wire cutter for thin & soft wire, hard wire cutter, screwdrivers 2, 3, 5 & 7.5 mm, strong crate opener, can opener, bottle opener, wire blender, large blade, mėtal saw, metal file, large blade with ivory edge, wood saw, reamer, punches, screwdriver 1/2, chisel and scraper, wire stripper, wire scraper, wire crimping tool (electric), ruler (230 mm), ruler (9 inch), coupling for Page 4 of Srl No NOMENCLATU RE OF EQUIPMENT cork screw, lanyard hole). SPECIFICATION OF ITEMS Addl. Remarks 7. Fire beater/flapper 1.Materials- Durable and heat resistant such as or stainless steel. Wooden handle is better and not metal 2.Size- large enough to cover a significant area and should be easy to handle. 3.Handle comfortable to hold and should be heat resistant material. 4. Length should be minimum 1.6 meters. 5.Shape- flat shape that allows for easy spreading of the flames. 6.Weiaht- light weight for easy maneuverability. (not more than 2 KG) 7.Durability- able to withstand repeated use and exposure to heat and flame. 8.Safety features- Non slip grip, safety guard to protect the user from burn 9.Should have reflective tape 10.Carrying case or cover for safety of equipment. 11.Warranty- 1 year 8 Rake (Arrow type/ nail type/ Peg tooth type) 1.Material- Durable and heat resi stant material such as stainless steel or MS. 2.Size- at least 24 inches in length with a width of at least 6 inches. 3. Teeth variety of teeth type, including arrow, nail and peg tooth to effectively break up and clear debris. 4.Handle: should have a sturdy, ergonomic handle that is easy to grip and provide comfortable grip for extended use. 5. 6.Weight- light weight, max. wt. - 2 kg for easy Photos CommePage 5 Srl No NOMENCLATU RE OF EQUIPMENT 9. Fire broom (Jhapa) 10. Flashlight(High beam) maneuverability. 7.Should have reflective tape/ striping on the handle and teeth. 8.Carrying case or cover for safety of equipment 9.Warranty- 1 year SPECIFICATION OF ITEMS Addl. Remarks Photos Commer 1. Durability- should be constructed with durable material that can withstand high temperatures and heavy use. 2. Heat Resistance- the handle and bristles of the fire broom should be able to withstand extreme heat without melting or breaking. 3. Size- Should be large enough to cover a wide area but also small enough for maneuverability in tight spaces. 4. Bristle material- should be made of heat resistant materials such as nylon or polypropylene. They should also be stiff enough to scrub away debris 5. Handle- should be made of a heat resistant material such as aluminum or fire glass It should also be long enough to provide a comfortable grip and easy maneuverability 6.Replaceable broom head 7.Light weight (max. 2KG) 8.Safety feature- Non slip grip and guard to protect the user from hot debris. 9. Steel wire-2mm diameter 10. Length of broom-45-50 cms 11. Wooden handle Brightness - At least 1000 Lumens 2.Beam distance-at least 200 mt, allowing fire fighters to see far into dark and smoky environment 3.Run tirme- at least 2 hrs. on high beam 4. Battery life- at least 15 hrs of continuous use on single charge 5.Size & weight- compact & light weight (not more than Wooden handle or bamboo lath type that is durable Page 6 of 11. Wind meter 700 gm) 6.Should also have a tail switch, which makes it easy to operate while wearing gloves. 7.Should be heat resistant and shock proof 8.Water proof and dust proof IP-67 9.Charging Time: less than 6 hours 10.Batery Type: Rechargeable Lithium Ion Battery. 11.Battery life expectancy-at least 1500 cycles 12.Adjustable focus 13.Should be made of durable material such as aluminium or rubber 14.Strobe or SOS feature to signal for help in emergency situationns 15.Non slip grip 16.LED technology (LED life-100000 hrs or more) 17.Warranty -2 year 1. Should be able to measure wind speed and direction with high accuracy. 2. Durable construction- Should be designed to withstand harsh outdoor conditions, including high teraperatures humidity and exposure to dust and debris. 3. Portable and light weight 4. Simple and intuitive interface that allows for easy operation even in low light conditions. 5. waterproof and dust proof (IP-67 rating) 6. Should have a backlit display 7. Should have the ability to store wind speed data for later analysis. 8. Long Battery life: at least10 days 9. With lanyard Warranty-at least 2 years No chaPage 7 12. Pathal (modified sickle) 1.Blade material- high quality carbon steel/ stainless steel. 2.Blade length -18-20 inches 3.Blade shape- curved with a sharp serrated edge 4.Handle material- durable and light weight eg. wood, plastic or rubber for easy handling and manoeuvrability. 5. Handle length- Long enough to provide a comfortable grip and control while cutting, but not too long 6.Safety features- should have a guard or safety ring to protect the hand from the blade and a locking mechanism to keep the blade securely in place while in use. Weight-not more than 1.5 kg Durability- able to withstand heavy use and exposure to harsh conditions such as extreme temperature and rough terrain. 7.A protective sheath for safe storage and transportation. 8. Warranty- 1 year Srl No NOMENCLATU RE OF EQUIPMENT SPECIFICATION OF ITEMS 13. Tool kit bag 1. It should be made of tear resistance ballistic material. 2. It should consist of 48 total pockets including 2 hardshell pockets to protect electronics and equipment from impact. 3. Dimension should be minimum:- D- 24 cm, W- 45 cm & H- 51 cm with ±5% 4. It should have padded and breathable load-bearing harness that evenly distributes the weight for more comfort and jobsite performance 5. It should have adjustable chest strap and attachment strap for rolling bags 6. It should have Rugged metal zippers to provide No chan Addl. Remarks Photos Commen No chang Page 8 of: