REGULAR OXYGEN LSP# 170-020 WITH LIGHT WEIGHT OXYGEN CYLINDERS

a) The medical Oxygen cylinder should be made quality of high * Strength of aluminium alloy with heat sensitive coating. * Capacity: 425 litres b) It should be duly approved by the Chief controller of c) Explosive (CCE) at Nagpur. d) The system should be rust proof. e) The refilling procedure should be risk free & simplex, with the help Of portable refilling station complete with pressure gauge to show filling pressure. f) All fittings should be leak proof. g) in built pressure gauge system to be provided with the cylinder. h) The medical Oxygen cylinder & all other fittings should be hygienic & free from contamination. i) Finishing should be standard seamless aluminium with clear coat of heat sensitive powder paint. Regulator j) Accessories: high pressure regulator, flow meter, connecting tube of 3 meter length, nasal cannula and non rebreather maskadult and infant sizes, carry pack with back harness; k) Compatible with light weight oxygen cylinder 1) Flow regulation of0-20 L/minute m) Outlet compatible with nasal cannula/non rebreather mask n) Control valve should be designed to provide calibrated flow of oxygen at a pressure of 16 PSIG to 70 PSIG depending on the application. o) The regulator must be made of anodized aluminium composite material. p) The pressure indicator on the valve must be protected by rubber- o- ring. q) The weight of the regulator inclusive flow meter system should not exceed 310 gms. r) The length of the regulator should not exceed 10 cm & diameter not to be more than 4 cm. s) Hypoallergenic surgical micro pore adhesive tape