ANGLE CUTTER (ELECTRIC) 14”

Specifications of Angle Cutter 1. Electric Motor operating in range of 230 Volts, 2600 watts + 10% power rating, with a maximum no load speed of 4900rpm + 10%and full load speed up to 3000 rpm+ 10% 15 Ampere three core electrical cord of 5 meter length with three pin plug will be provided. 2. The saw is to mount replaceable 12" (300mm) diameter diamond tipped or tungsten carbide tipped blade not more than 25 mm arbor. The saw should be able to cut to a minimum depth of 100mm. One tungsten carbide tipped blade will be provided as an integral component of the equipment. 3. It should be possible to adjust the position of the tool body through a minimum of 70 degrees independently of the cutting depth. It should also be possible to remove the tool base for cutting closer to walls and should be provided with guide wheels on the tool guard to ensure smooth travel over the surface material. 4. Operator Comfort and Safety Provisions a) A vacuum port for removal of the dust and debris as well as shield for keeping debris away from the operator will be provided. b) A system for disengaging gears from motor to minimize effect of kickbacks will be provided to ensure operator safety. c) Optional . d) A rubberized wrap around handle will be provided. 5.Accessories The following accessories will be provided with each set:- a) One spare tungsten carbide tipped blade and two continuous rim diamond tipped blades. b) Carrying case c) Tool kit d) Operation and Maintenance manual