CHIPPING HAMMER MEDIUM

S.N TECHNICAL SPECIFICATION PICTURE OF EQUIPTMENT 01. With adjustable bits 02. Chiselling impact rate – 900 to 1900 bpm 03. Single impact force – 15J to 25J 04. Power input:- 1000 w – 1900 w 05. Weight:- 08 to 12 Kgs (can be easily operated by single rescuer on all type of site and at all angles) 06. Voltage required – 220V-240V 07. Light in weight, Shock proof body with required accessories, lubricant & electric cord of equipment not less than 4 mtr in length with 10/15 Amp 3 pin convertible in to 2 pin plug. 08. Equipment must have dust seal to protect from entering of dust inside the machine. 09 Eqpt. Should be certified from national BSA/international (EPTO) agencies. 10. Noise level :- not more than 120 Db. 11. Easy to operate SUITABLE on/off SWITCH. 12. Equipment must have active vibration absorbing system (AVAS). And should fulfil adequate safety norms as per international standard. 13. Equipment must be supplied with two (one flat & one pointed tipped) spare bits. Including standard Greece, spare EAR plugs, dust cap. a. CHIPPING HAMMER BIT FLAT S.N Technical Specification a Bit length not less than 28 cm & 41cm b Bit diameter should match with the size of bit c Material high tensile steel. b. CHIPPING HAMMER BIT POINTED S.N Technical Specification a Bit length not less than 28 cm & 41cm b Bit diameter should match with the size of bit locker of the equipment. 115 62(a). CHIPPING HAMMER HEAVY WEIGHT (25-30 K S.N TECHNICAL SPECIFICATION 01. With adjustable bits 02. Chiselling impact rate: – More than 800bpm. 03. Single impact force – 45J or more 04. Power input:- 1500 w – 2000 w 05. Weight:- 25 to 30 Kgs 06. Light in weight, Shock proof body with required accessories, lubricant & electric cord of equipment not less than 4 mtr in length with 10/15 Amp 3 pin convertible in to 2 pin plug. 07. Equipment must have dust seal to protect from entering of dust inside the machine. 08. Adjustable auxiliary handle. 09 Equipment Should be certified from national BSA/international (EPTO) agencies. 10. Easy to operate on/off slide switch, mode selector switches etc. 11. Equipment must have active vibration absorbing system (AVAS). And should fulfill adequate safety norms as per international standard. 12. Equipment must be supplied with two (one flat & one pointed tipped) spare bits. Including standard Greece, spare Ear plugs, dust cap. 13. Protective/Carrying/Housing case should be made up of hard durable plastic material. And should be designed that it fully protects the eqpt from getting damaged and for easy handling of eqpt during transit. 14. Noise level :- not more than 120 Db.